Proven Plaza

Concrete Sealer Calculator (Gallons by Coverage)

How many gallons of concrete sealer for a driveway, patio or garage from area, coats and the label coverage — defaulting to Rust-Oleum's 250 sq ft/gal penetrating-sealer figure.

Formula

Gallons = area × coats ÷ coverage × (1 + waste). Buy the ceiling of that number.

Worked example

Inputs: Area to seal = 500 sq ft; Coverage (from the label) = 250 sq ft/gal; Coats = 2; Waste allowance = 10 %.

Gallons exact4.4
Gallons to buy5
Coverage used sq ft per gal250

Rust-Oleum RockSolid Penetrating Concrete Sealer TDS: about 250 sq ft per gallon (single coat); porosity changes coverage. Endurable Concrete Sealer: about 500–1,000 sq ft/gal interior and 300–700 exterior — enter your product's rate. Apply thin coats; follow the label for recoats and cure.

FAQ

How much sealer for a 500 sq ft driveway?

At 250 sq ft/gal, two coats and 10% waste: 4.4 gal — buy 5 gallons.

What coverage should I enter?

Use the product TDS. Rust-Oleum penetrating sealer ≈250 sq ft/gal; Endurable lists 500–1,000 interior and 300–700 exterior.

Do porous slabs need more?

Yes — first coats soak in. Use the low end of the coverage range or plan a second coat.

Can I seal new concrete right away?

Follow the label; many cure-and-seals go on when the slab can take foot traffic, while penetrating sealers often want a longer cure.

Is this for acrylic and silane sealers?

The math is the same; only the coverage number changes. Enter your product's sq ft per gallon.

Sources

Related

More Concrete calculators

Embed this calculator

Free to embed on your site; please keep the credit link.

Last reviewed 2026-11-20.