Deck Stain Calculator (Gallons by Coverage)
How many gallons of deck stain to buy from your deck area, coats and the product's coverage — using Sherwin-Williams' typical 250–350 sq ft per gallon range.
Formula
Gallons (low) = area × coats ÷ coverage_high × (1 + waste). Gallons (high / buy) = area × coats ÷ coverage_low × (1 + waste).
Worked example
Inputs: Deck area (include railings if staining them) = 400 sq ft; Coverage low (label) = 250 sq ft/gal; Coverage high (label) = 350 sq ft/gal; Coats = 2; Waste / soak-in allowance = 10 %.
| Gallons exact low | 2.51 |
|---|---|
| Gallons exact high | 3.52 |
| Gallons to buy | 4 |
| Sq ft per gallon range | 250–350 |
Sherwin-Williams, How to Plan for Deck Staining: typically one gallon covers about 250–350 sq ft depending on wood type; most decks need one to two coats. Enter your product's label coverage if listed. Rough, porous or vertical surfaces use the low (conservative) end.
FAQ
How much stain for a 400 sq ft deck?
At 250–350 sq ft/gal and two coats with 10% waste: about 2.5–3.5 gal — buy 4 gallons.
How many coats of deck stain?
Sherwin-Williams: most decks need one to two coats; check the label and wait about 24 hours between coats.
Does wood type change coverage?
Yes — rough or weathered wood soaks more (use the low sq ft/gal). Dense or previously sealed wood covers farther.
Should I stain railings too?
Include their surface area if you'll stain them; pickets and balusters add a lot of square footage.
When can I stain a new deck?
For pressure-treated wood, Sherwin-Williams suggests waiting at least 6 months so the wood is dry.
Sources
Related
- Deck Board Calculator
- Paint Calculator (Gallons for Walls)
- Caulk Calculator (Tubes of Caulk or Sealant per Linear Foot)
More Exterior calculators
- Roofing Calculator (Squares, Bundles & Pitch Factor)
- Fence Calculator (Posts, Rails & Pickets)
- Gutter & Downspout Size Calculator (Roof Runoff, Gutter Capacity, Number of Downspouts)
- Attic Ventilation Calculator (Net Free Area, Ridge & Soffit Vents)
- Stucco Calculator (Bags of Base and Finish Coat)
- Dew Point Calculator (Painting, Coating & Condensation Check)
Embed this calculator
Free to embed on your site; please keep the credit link.
Last reviewed 2026-11-20.