Proven Plaza

Wood Shrinkage Calculator (Lumber Movement by Species & Moisture)

How much a board shrinks or swells across the grain when its moisture content changes, using the USDA Wood Handbook dimensional change coefficients for 24 common species.

Formula

Change = width × C × (MC later − MC now). C = CT (tangential) for flatsawn width, CR (radial) for quartersawn width, from Wood Handbook Table 13-5 (valid 6–14% MC).

Worked example

Inputs: Species = Red oak; Board width (or thickness) = 5.5 in; Moisture content now = 12 %; Moisture content later = 7 %; Grain across this dimension = Flatsawn width (tangential).

SpeciesRed oak, northern red
Coefficient0.003
Coefficient typeCT (tangential, flatsawn width)
Change in-0.084
Change mm-2.12
New width in5.416
DirectionShrinks
Range checkWithin the 6–14% range of the coefficients

USDA FPL Wood Handbook (FPL-GTR-282) Eq. 13-3: ΔD = D × C × (MC end − MC start), with dimensional change coefficients from Table 13-5 (per 1% MC, valid 6–14%). Handbook example: 9.15 in flatsawn white fir, 8% → 11%: +0.067 in. Commercial lumber is rarely perfectly flat- or quartersawn, so this tends to overestimate width change and underestimate thickness change.

FAQ

How much does a 5.5 in red oak board shrink from 12% to 7%?

Flatsawn: 5.5 × 0.00304 × −5 ≈ −0.084 in (about 2.1 mm).

Why does quartersawn wood move less?

Radial coefficients are roughly half the tangential ones for most species.

Does wood shrink in length?

Very little; shrinkage along the grain is usually negligible next to width and thickness.

What moisture range does this cover?

6% to 14%, where shrinkage is close to linear. Outside that, the Handbook uses green shrinkage values instead.

How do I find the target moisture content?

Use the wood equilibrium moisture content calculator for the room's typical temperature and humidity.

Sources

Related

Embed this calculator

Free to embed on your site; please keep the credit link.

Last reviewed 2026-11-20.