Ladder Angle Calculator (OSHA 4-to-1 Rule, Base Distance & Length)
Where to set the foot of an extension ladder and how long a ladder you need: OSHA's 1-to-4 rule (about 75.5°), the 1-to-8 rule for spliced job-made ladders, and the 3 ft extension above a roof edge or landing.
Formula
Working length L = height ÷ √(1 − 1/k²), k = 4 (or 8). Base distance = L ÷ k. Angle = arccos(1/k) ≈ 75.5° (82.8° for 1:8). Ladder needed = L + 3 ft when accessing an upper landing.
Worked example
Inputs: Height to top support (e.g. gutter or roof edge) = 16 ft; Ladder type = Standard portable ladder (1:4); Climbing onto a roof or landing? = Yes — add 3 ft extension.
| Working length ft | 16.52 |
|---|---|
| Base distance ft | 4.13 |
| Angle deg | 75.5 |
| Ratio | 1:4 (horizontal : working length) |
| Ladder length needed ft | 19.52 |
OSHA 29 CFR 1926.1053(b)(5)(i): set a non-self-supporting ladder so the horizontal distance from the top support to the foot is about one-quarter of the working length (≈75.5°); (b)(5)(ii) wood job-made ladders with spliced rails use one-eighth. (b)(1): when used to reach an upper landing, the side rails must extend at least 3 ft above it. Working length = height to top support ÷ √(1 − 1/k²). Extension ladders also lose length to section overlap; check the label.
FAQ
What is the 4 to 1 ladder rule?
OSHA 1926.1053(b)(5)(i): the foot should be about one-quarter of the working length out from the top support, roughly 1 ft out for every 4 ft of ladder, about 75.5°.
How far from the wall for a 16 ft height?
Working length ≈ 16.52 ft, so the base goes about 4.13 ft out.
How far should a ladder extend above the roof?
At least 3 ft above the upper landing surface (1926.1053(b)(1)), or secure the top and provide a grab rail if it cannot.
What size ladder do I need for a 16 ft roof edge?
About 16.5 ft of working length plus 3 ft above the edge ≈ 19.5 ft, so a 24 ft extension ladder once section overlap is counted.
How far apart are ladder rungs?
10 to 14 in on center for portable and fixed ladders (1926.1053(a)(3)(i)).
Sources
Related
- Rafter Length Calculator (Roof Run, Rise and Pitch)
- Stair Stringer Calculator (Risers, Treads & Stringer Length)
- Roofing Calculator (Squares, Bundles & Pitch Factor)
More Framing calculators
- Wall Stud Calculator (Studs & Plates for a Framed Wall)
- Wheelchair Ramp Calculator (ADA 1:12 Length, Landings & Handrails)
Embed this calculator
Free to embed on your site; please keep the credit link.
Last reviewed 2026-11-20.