Spray Foam Insulation Calculator (Board Feet & R-Value)
Board feet of spray foam, approximate R-value and how many kits or sets you need for an area and thickness — using manufacturer R-values and published yields for closed- and open-cell foam.
Formula
Board feet = sq ft × inches. R ≈ thickness × 7.0 (closed, JM Corbond IV) or × 3.9 (open, BASF ENERTITE G <4 in; 3.7 at ≥4 in). Sets ≈ board feet with waste ÷ 5,000 (closed) or ÷ 19,000 (open midpoint).
Worked example
Inputs: Wall or roof area = 1000 sq ft; Foam thickness = 3 in; Foam type = Closed-cell (≈ R-7.0/in); Overspray / waste allowance = 10 %.
| Board feet | 3,000 |
|---|---|
| Board feet with waste | 3,300 |
| R value total | 21 |
| Estimated sets | 0.66 |
| Kits 660 bdft | 5 |
| Foam | Closed-cell |
Board feet = area (sq ft) × thickness (in). Closed-cell aged R-value about 7.0 per inch (Johns Manville Corbond IV); open-cell about 3.9 per inch below 4 in and 3.7 per inch at 4 in or more (BASF ENERTITE G). Set yields are theoretical midpoints: closed ~5,000 bd ft (JM / UPC HFO sheets), open 17,000–21,000 bd ft/set (BASF, midpoint 19,000). Touch 'n Seal CP660 kit = 660 board feet. Actual yield varies with substrate, temperature, altitude and technique (SPFA estimating guidance).
FAQ
What is a board foot of spray foam?
One square foot at one inch thick. A 1,000 sq ft wall at 3 in is 3,000 board feet.
Closed-cell vs open-cell R-value?
About R-7.0 per inch closed (JM Corbond IV aged) vs about R-3.9 per inch open below 4 in (BASF ENERTITE G).
How many kits for 3,300 board feet?
Touch 'n Seal CP660 is 660 board feet: ceil(3300 ÷ 660) = 5 kits. Full sets yield much more.
Is the set yield guaranteed?
No — manufacturers publish theoretical yields; substrate, temperature, altitude and technique change the real number (BASF / SPFA).
Can I DIY spray foam?
Two-component kits exist for small jobs; whole-house work is usually done by trained SPF contractors.
Sources
- Johns Manville Corbond IV closed-cell spray foam data sheet: aged R-value 7.0 per inch (ASTM C518); high yield about 5,000 board feet per set
- BASF ENERTITE G open-cell spray foam technical data sheet: aged R-value 3.9 per inch below 4 in thickness; estimated theoretical yield 17,000–21,000 board feet per set
- UPC Closed-Cell HFO spray foam one-sheet: R-value about 7.6–7.9 at 1 in; yield up to about 4,700–5,000 board feet
- Touch 'n Seal FR Two-Component Class I foam tech data: Foam Kit CP660 yields 660 board feet; RF60 gallon refill 6,000 board feet (at 1 in)
Related
- Insulation R-Value Thickness Calculator
- Attic Ventilation Calculator (Net Free Area, Ridge & Soffit Vents)
- Appliance Energy Cost Calculator (kWh and $ per Year)
More Energy calculators
- Solar Panel Calculator (How Many Panels Do I Need?)
- EV Charging Cost Calculator (Cost per Mile, Month and Full Charge by State)
Embed this calculator
Free to embed on your site; please keep the credit link.
Last reviewed 2026-11-20.