Lawn Fertilizer Calculator (Pounds per 1,000 Sq Ft from N-P-K)
How much fertilizer to put on your lawn: pounds of product per 1,000 sq ft and for the whole lawn, from the nitrogen rate you want and the N-P-K numbers on the bag, plus bags to buy and the phosphate and potash you apply along with it.
Formula
Product per 1,000 sq ft = N rate ÷ (N% ÷ 100). Total = product per 1,000 × area ÷ 1,000. Bags = total ÷ bag weight, rounded up. P₂O₅ (or K₂O) per 1,000 = product per 1,000 × P% (or K%) ÷ 100.
Worked example
Inputs: Lawn area (turf only) = 5000 sq ft; Nitrogen rate wanted = 1 lb N per 1,000 sq ft; Nitrogen % (first number on the bag) = 24; Phosphate % (second number) = 0; Potash % (third number) = 6; Bag weight (optional) = 0 lb.
| Product lb per 1000 sq ft | 4.17 |
|---|---|
| Product lb total | 20.8 |
| Bags to buy | — |
| Nitrogen lb total | 5 |
| Phosphate p2o5 lb per 1000 | 0 |
| Potash k2o lb per 1000 | 0.25 |
Pounds of product per 1,000 sq ft = pounds of nitrogen wanted ÷ (N% ÷ 100), where N is the first number on the bag (Penn State, Purdue, Rutgers, LSU). Multiply by area ÷ 1,000 for the whole lawn. Extension services typically suggest 0.5–1 lb N per 1,000 sq ft per application (Iowa State, LSU); follow your soil test and local rules. Measure turf only, not driveways or beds.
FAQ
How much 24-0-6 per 1,000 sq ft?
For 1 lb of nitrogen: 1 ÷ 0.24 = 4.2 lb of product per 1,000 sq ft.
How much 10-10-10 for 1 lb of nitrogen?
1 ÷ 0.10 = 10 lb of product per 1,000 sq ft, which also applies 1 lb each of phosphate and potash.
How much nitrogen should I apply at one time?
Extension services commonly recommend 0.5 to 1 lb of actual nitrogen per 1,000 sq ft per application (Iowa State). Rutgers notes a single application of soluble nitrogen is usually limited to 1 lb.
How much fertilizer for an 8,000 sq ft lawn?
With 16-8-8 at 0.75 lb N: 0.75 ÷ 0.16 = 4.69 lb per 1,000 sq ft, × 8 = 37.5 lb (Purdue's example).
Should I count the driveway?
No. Measure only the turf; subtract driveways, walks, the house and planting beds.
Sources
- Penn State Extension, Calculations Used to Determine the Amount of Fertilizer Needed to Treat Turf (1.0 lb N per 1,000 sq ft ÷ 0.26 = 3.8 lb of 26-5-10)
- Purdue Turfgrass Science, Calculating the pounds of fertilizer to apply (0.75 lb N ÷ 0.16 = 4.69 lb of 16-8-8 per 1,000 sq ft; 37 lb for 8,000 sq ft)
- Rutgers NJAES Fact Sheet FS839, How to Calculate the Amount of Fertilizer Needed for Your Lawn (Table 1; 25,000 sq ft at 5 lb of 20% N per 1,000 = 125 lb)
- Iowa State University Extension, How much fertilizer should I apply to my lawn? (0.50 to 1 lb of actual nitrogen per 1,000 sq ft per application)
Related
More Landscape calculators
- Mulch, Gravel & Topsoil Calculator (Cubic Yards)
- Paver Calculator (Pavers, Base Gravel & Sand)
- Retaining Wall Block Calculator (Blocks, Caps, Base Gravel & Drainage Rock)
- French Drain Calculator (Gravel, Pipe, Slope & Fabric)
- Trench Sloping Calculator (OSHA Soil Type A, B, C Slopes & Volume)
- Rational Method Calculator (Stormwater Runoff Q = CiA, Weighted C)
Embed this calculator
Free to embed on your site; please keep the credit link.
Last reviewed 2026-11-20.