Proven Plaza

Trench Sloping Calculator (OSHA Soil Type A, B, C Slopes & Volume)

The OSHA maximum allowable side slope for your trench by soil type, the top width and setback it creates, and the excavated volume in cubic yards versus a vertical cut — from 29 CFR 1926 Subpart P, Appendix B (Table B-1).

Formula

Slope H:V from Table B-1 (A 3/4:1, short-term 1/2:1; B 1:1; C 1-1/2:1). Setback = H × depth. Top width = bottom + 2 × setback. Volume = (top + bottom) ÷ 2 × depth × length ÷ 27.

Worked example

Inputs: Trench depth = 6 ft; Bottom width = 3 ft; Trench length = 20 ft; OSHA soil type = Type B; Open 24 hours or less? (Type A only) = No.

Max slope h to v1:1
Slope angle deg45
Setback each side ft6
Top width ft15
Excavation cu yd40
Vertical trench cu yd13.33

OSHA 29 CFR 1926 Subpart P, Appendix B, Table B-1 maximum allowable slopes (H:V) for excavations 20 ft or less: Type A 3/4:1 (1/2:1 if open 24 h or less and 12 ft or less deep), Type B 1:1, Type C 1-1/2:1. Cut back at least another 1/2:1 if there are signs of distress; surcharge loads need a competent person's reduction. Soil must be classified per Appendix A. Volume is the trapezoid cross-section × length. Not a substitute for a competent person on site.

FAQ

What is the OSHA slope for Type B soil?

1:1 (45°) for excavations 20 ft or less deep (Appendix B, B-1.2).

What is the slope for Type C soil?

1-1/2:1 (about 34°), the flattest of the three.

What about Type A soil?

3/4:1 (about 53°); a short-term excavation open 24 hours or less and 12 ft or less deep may use 1/2:1.

How wide is the top of a 6 ft deep Type B trench?

With a 3 ft bottom: 3 + 2 × 6 = 15 ft across the top, and about 40 cu yd for 20 ft of length versus 13.3 cu yd for a vertical cut.

What if the trench is deeper than 20 ft?

Appendix B no longer applies; 1926.652(b) requires a sloping or benching design by a registered professional engineer.

Sources

Related

More Landscape calculators

Embed this calculator

Free to embed on your site; please keep the credit link.

Last reviewed 2026-11-20.