Porta Potty Calculator for Job Sites (OSHA Toilet Requirements per Worker)
The minimum number of toilets OSHA requires for a construction crew (Table D-1) or a general-industry workplace (Table J-1), from the number of workers.
Formula
Construction (Table D-1): 20 or fewer → 1; 20 or more → 1 toilet seat + 1 urinal per 40 workers; 200 or more → 1 seat + 1 urinal per 50, rounded up. General industry (Table J-1): 1–15 → 1, 16–35 → 2, 36–55 → 3, 56–80 → 4, 81–110 → 5, 111–150 → 6, then +1 per 40.
Worked example
Inputs: Number of workers = 60 workers; Workplace = Construction job site (1926.51).
| Toilet seats min | 2 |
|---|---|
| Urinals min | 2 |
| Rule | 1 toilet seat and 1 urinal per 40 workers |
OSHA 29 CFR 1926.51(c)(1) Table D-1 (construction): 20 or less, 1; 20 or more, 1 toilet seat and 1 urinal per 40 workers; 200 or more, 1 toilet seat and 1 urinal per 50 workers (counts round up). Sites without sewer use chemical, recirculating, combustion toilets or privies (c)(3). Mobile crews with transport readily available to nearby toilets are exempt (c)(4). Table D-1 switches to 1 per 50 at 200, so 199 workers needs 5 + 5 and 200 needs 4 + 4. Local codes and your rental company may require more (e.g. for long shifts or events).
FAQ
How many porta potties per worker does OSHA require on a construction site?
One for 20 or fewer workers. Above that, 1 toilet seat and 1 urinal per 40 workers (per 50 once you reach 200). 60 workers: 2 seats and 2 urinals.
Do portable toilets count?
Yes. Sites without a sanitary sewer may use chemical, recirculating or combustion toilets, or privies where they will not contaminate water (1926.51(c)(3)).
Are mobile crews exempt?
The requirement does not apply to mobile crews that have transportation readily available to nearby toilet facilities (1926.51(c)(4)).
Why does 200 workers need fewer than 199?
Table D-1 switches from 1 per 40 to 1 per 50 at 200 workers, so 199 workers rounds up to 5 + 5 and 200 to 4 + 4. Many contractors simply keep the 199 count.
Does this work for events?
No. OSHA covers employees only. Event toilet counts come from local health codes and rental-company guidance.
Sources
- OSHA 29 CFR 1926.51(c) Toilets at construction jobsites (eCFR), Table D-1: 20 or less, 1; 20 or more, 1 toilet seat and 1 urinal per 40 workers; 200 or more, 1 toilet seat and 1 urinal per 50 workers
- OSHA 29 CFR 1910.141(c)(1) Toilet facilities (eCFR), Table J-1: minimum water closets by number of employees (1–15: 1 … 111–150: 6; over 150: 1 per additional 40)
Related
- Trench Sloping Calculator (OSHA Soil Type A, B, C Slopes & Volume)
- Heat Index Calculator (NWS Formula, Danger Levels & OSHA Heat Notes)
- Septic Tank Size Calculator (Florida Rule 62-6.008: Tank Gallons & Drainfield Area)
More Safety calculators
- Wind Chill Calculator (NWS Formula, °F and °C)
- Noise Exposure Calculator (OSHA Noise Dose % & 8-Hour TWA)
- Sling Angle Calculator (Rigging Load Angle Factor & Tension per Leg)
- NIOSH Lifting Equation Calculator (RWL & Lifting Index)
- 8-Hour TWA Calculator (OSHA Time-Weighted Average & Mixture Formula)
Embed this calculator
Free to embed on your site; please keep the credit link.
Last reviewed 2026-11-20.