Sling Angle Calculator (Rigging Load Angle Factor & Tension per Leg)
Tension in each sling leg from the load, the number of legs and the sling angle (or sling length and height), using the angle factors in OSHA's rigging handbook.
Formula
Angle factor = 1 ÷ sin(angle from horizontal) = sling length ÷ height. Tension per leg = load ÷ legs × angle factor. Rated capacity at angle = vertical rating × sin(angle).
Worked example
Inputs: Load weight = 2000 lb; Legs sharing the load = 2; Sling angle from horizontal = 45 °; Sling length (optional, overrides angle) = 0 ft; Sling height, hook to load (optional) = 0 ft.
| Sling angle deg from horizontal | 45 |
|---|---|
| Angle factor | 1.414 |
| Tension per leg lb | 1,414 |
| Min rated capacity per leg lb | 1,414 |
| Capacity reduction factor | 0.707 |
| Angle check | OK (30° or more) |
OSHA Advanced Rigging Principles student handbook, Table A1 sling angle factors (90° 1.000, 60° 1.155, 45° 1.414, 30° 2.000; do not set below 30°). Angle factor = 1 ÷ sin(angle from horizontal) = sling length ÷ height. Tension per leg = load ÷ legs × factor, assuming equal legs and a centered center of gravity. With 3 or 4 legs on a rigid load, riggers commonly assume only 2 legs carry it; enter 2 to be conservative. OSHA 29 CFR 1910.184 defines the angle of loading.
FAQ
What is the load on each leg at 45°?
Load ÷ 2 × 1.414: a 2,000 lb load puts about 1,414 lb on each of two legs.
What is the sling angle factor at 60° and 30°?
1.155 at 60° and 2.000 at 30° (OSHA rigging handbook Table A1).
What is the minimum sling angle?
Do not set below 30° from horizontal without approval from the sling manufacturer or a qualified person.
How do I get the angle without a protractor?
Measure sling length and the vertical height from hook to load: factor = length ÷ height.
Do 4-leg slings share the load equally?
Not reliably on a rigid load; many riggers assume only two legs carry it. Enter 2 legs to be conservative.
Sources
- OSHA, Advanced Rigging Principles Training Course, Student Handbook (2021), Table A1 Sling Angle Factors (90° 1.000 … 60° 1.155, 45° 1.414, 30° 2.000; do not set below 30° without manufacturer or qualified-person approval)
- OSHA 29 CFR 1910.184 Slings (eCFR): (b) angle of loading definition; slings must be marked with rated load, hitch and the angle it is based on
Related
- Ladder Angle Calculator (OSHA 4-to-1 Rule, Base Distance & Length)
- Noise Exposure Calculator (OSHA Noise Dose % & 8-Hour TWA)
- Trench Sloping Calculator (OSHA Soil Type A, B, C Slopes & Volume)
More Safety calculators
- Heat Index Calculator (NWS Formula, Danger Levels & OSHA Heat Notes)
- Wind Chill Calculator (NWS Formula, °F and °C)
- NIOSH Lifting Equation Calculator (RWL & Lifting Index)
- 8-Hour TWA Calculator (OSHA Time-Weighted Average & Mixture Formula)
- Porta Potty Calculator for Job Sites (OSHA Toilet Requirements per Worker)
Embed this calculator
Free to embed on your site; please keep the credit link.
Last reviewed 2026-11-20.